Why Your Company Needs a Safety Policy Statement

How to Create a Company Safety Policy Your very first step towards safety. If you’re trying to start a safety program from scratch - you’re probably feeling very overwhelmed. This is completely normal, and many of my clients express the same feelings to me. They just don’t know where to start. Even with a guide at their side, there’s just too much information to process all at once. So I’m going to give you the perfect starting point. You’re going [...]

By |2024-06-05T18:37:54-05:00June 5th, 2024|OSHA Health & Safety, OSHA Texas Laws & Regulations, Safety Training, Texas OSHA Compliance|Comments Off on Why Your Company Needs a Safety Policy Statement

EHS Compliance Case Study Success Story

LEARN HOW WE HELPED THIS SMALL MANUFACTURER ACHIEVE FULL ENVIRONMENTAL, HEALTH AND SAFETY COMPLIANCE IN LESS THAN 1 YEAR (AT A FRACTION OF THE COST OF HIRING A FULL TIME EHS MANAGER) Below is a transcript of our case study video.  Click Here to gain instant access to the video. Introduction: Hello everyone. Russell Carr here, founder of Bird Compliance Solutions, and in this case study video I'm going to explain to you how we helped a small Texas manufacturer [...]

By |2024-04-25T11:12:51-05:00April 25th, 2024|Hazardous Waste Management, OSHA Health & Safety, OSHA Texas Laws & Regulations, Safety Training, Testimonials, Texas OSHA Compliance|Comments Off on EHS Compliance Case Study Success Story

How to Build a Manufacturing Safety Program

Three Secrets to Building an Effective Manufacturing Safety Program Safety is one of the first lessons we learn as kids—don’t touch the hot burners on the stove, don’t run with scissors, and don’t push your sister too hard on the swings. But developing a comprehensive safety program for your manufacturing plant isn’t so simple—and the stakes are much higher. According to the US Bureau of Labor Statistics, fatal workplace injuries rose 5.7% in 2022. Injury and illness cases were also [...]

By |2024-01-14T13:10:43-05:00January 14th, 2024|OSHA Health & Safety, OSHA Texas Laws & Regulations, Safety Training, Texas OSHA Compliance|Comments Off on How to Build a Manufacturing Safety Program

How Much Could a Failed OSHA Inspection Cost Your Company?

Are you worried about the possibility of OSHA showing up at your front door for a surprise inspection and you're not exactly sure how to prepare for that possibility? If that sounds like you, you’ve come to the right place! If you're not prepared for the possibility of an inspection, this can cost your company literally $tens or even $hundreds of thousands dollars. Those fines can stack up quickly so you may want to be prepared and prevent [...]

By |2023-12-08T16:57:42-05:00December 8th, 2023|OSHA Health & Safety, OSHA Texas Laws & Regulations, Safety Training, Texas OSHA Compliance|Comments Off on How Much Could a Failed OSHA Inspection Cost Your Company?

What Manufactures Need to Know about OSHA Emergency Action Plans

What Manufacturing Leaders Must Know about OSHA Emergency Action Plans  What Manufacturing Leaders Must Know about OSHA Emergency Action Plans  Do you know the difference between an OSHA emergency action plan and basic workplace safety protocols? If not, you’re almost certainly putting your employees and facility at risk.  We all know something about basic safety standards and try to minimize risks in our facilities. However, that hard work doesn’t always meet OSHA safety requirements—which means you’re gambling with your bottom [...]

By |2023-10-12T14:35:21-05:00October 11th, 2023|OSHA Health & Safety, OSHA Texas Laws & Regulations, Safety Training, Texas OSHA Compliance|Comments Off on What Manufactures Need to Know about OSHA Emergency Action Plans

Why Manufacturers Need an OSHA-Compliant Lockout/Tagout Program

Have you ever had an employee injury or death because of a machine that wasn’t completely turned off? Even if you’re among the lucky few who haven't experienced this type of incident, nationwide lockout/tagout violations are on the rise. With an increase of 279 violations between 2021 and 2022, OSHA inspectors are cracking down on one of the highest-risk situations on the floor.   2023’s numbers are already climbing, and you can’t afford to get flagged for non-compliance—or worse, risk the [...]

By |2023-08-21T10:44:57-05:00August 21st, 2023|OSHA Health & Safety, OSHA Texas Laws & Regulations, Safety Training, Texas OSHA Compliance|Comments Off on Why Manufacturers Need an OSHA-Compliant Lockout/Tagout Program