San Antonio Safety Consultants: OSHA Compliance, EHS Consulting and Safety Training

Berg Compliance Solutions provides safety, EHS, and HSE consulting for San Antonio manufacturers and general contractors, covering workplace safety, TCEQ and EPA environmental requirements, and hazardous waste disposal. We’ve served San Antonio and South Texas for more than 22 years, and our consultants are on-site in the area every month.

Talk with a safety consultant for free, or call 888-784-1405.

Most business owners we work with run good companies. They care about their people, and they’re already doing a lot right. What they don’t have is the time or in-house expertise to keep up with OSHA, TCEQ, and EPA requirements on top of running the business. That’s the part we take off their plate.

Not sure where you stand today? Our free, 2-minute OSHA Inspection Readiness and Compliance Risk Calculator gives you a readiness score and an estimate of your penalty exposure.

What Does a San Antonio Safety Consultant Do?

Our compliance services cover the full picture: finding your OSHA, TCEQ, and EPA gaps, building the programs to close them, and managing those programs month after month. Depending on your operation, that typically includes:

• Compliance assessments that show exactly which OSHA, TCEQ, and EPA rules apply to you and where the gaps are
• Company-specific written programs and procedures, built around your equipment and processes
• On-site employee training your people actually understand
• Routine safety inspections with written findings and corrective actions
• Mock OSHA inspections and industrial hygiene surveys
• Environmental compliance, including stormwater, SPCC, air permitting, and Tier II reporting
• Hazardous waste management and disposal, from waste determinations to pickup and manifests
• Support during OSHA and TCEQ inspections, including responding to citations

Facing an OSHA Inspection, Before or After?

Whether an inspection hasn’t happened yet or already has, the next step is the same: find out exactly where you stand.

Concerned about an unannounced inspection?

OSHA inspectors usually arrive without warning, often after an employee complaint or a reported injury. A mock OSHA inspection or FACTORY Risk Assessment shows you what an inspector would see on your floor and in your records, ranks the gaps by risk, and estimates your penalty exposure, so you can fix the biggest problems first.

Received an OSHA citation?

The clock starts the day you receive it. Citations must be posted, you have 15 working days to contest them, and each hazard has to be corrected and documented by its abatement date. We help you meet every deadline, close out the citations, and fix the programs behind them, since repeat violations cost far more. If OSHA is involved now, call 888-784-1405.

“We initially chose to use Berg for their expertise because we believe it is not cost effective to develop that level of depth internally. We continue to use Berg because Berg is not your typical EHS consulting company.” Daryl Lanaville, Plant Manager, Solaris Oilfield Infrastructure

Local OSHA Compliance Consultants Who Know South Texas

Berg has worked with San Antonio companies for more than 22 years, and our consultants are in the area every month for on-site visits. Between visits, you can reach us by phone or email, and we respond quickly.

Local knowledge matters here. San Antonio employers work with OSHA’s San Antonio area office on workplace safety and TCEQ’s San Antonio regional office on environmental compliance. Parts of the region also sit over the Edwards Aquifer recharge and contributing zones, where TCEQ has extra rules that can affect construction projects and some facilities. We help clients figure out which of those rules apply to them, and then we keep them on track.

OSHA Compliance Consulting for San Antonio Manufacturers

FACTORY-Safe is our ongoing partnership for manufacturers, built around monthly on-site visits: each visit covers inspections, training, and program updates, and hazardous waste needs can be handled by the same team. Between visits, clients see where every part of their program stands in Safety Trac, our web-based platform.

Many of our manufacturing clients have been with us for years. That’s by design. Employees change, equipment changes, and regulations change, so compliance is never really finished. A partner who already knows your operation can keep up with those changes without starting over every time.

If you’re new to us, the usual first step is a FACTORY Risk Assessment. We walk your facility, review your written programs and training records, and check your environmental and waste practices. You get a prioritized list of what needs fixing first, along with an estimate of your potential fine liability.

Curious what we’d find on your shop floor? Request a free consultation and we’ll walk through it with you.

Here’s what one of our long-term San Antonio manufacturing clients had to say about working with us:

“We have had a really great experience with Berg thus far! Our consultant has been very accessible, consistent, and professional. Our experience with Russell, the company president, has been consistently positive as well. He is easy to reach, which makes me feel more confident that if we ever needed anything out of normal circumstances, Berg Compliance would make sure we are covered. I look forward to continuing our work with this company!”

On-Site OSHA Safety Training in San Antonio

Training happens at your site, on your equipment, during your monthly visits, so it fits around production instead of interrupting it. It’s included in FACTORY-Safe and BUILD-Safe, and it’s also available as a standalone service.

We cover the topics inspectors ask about most, including lockout/tagout, machine guarding, hazard communication, forklifts, PPE, fall protection, silica, and confined spaces. Every session is documented, so your records are ready when OSHA or a customer asks.

Safety Consulting for San Antonio General Contractors

General contractors are responsible under OSHA for safety across the whole job site, including their subcontractors’ work. BUILD-Safe gives you the program to manage that. We write your safety program, train your crews, inspect your job sites, and set up a simple way to hold subcontractors to your standards.

Projects over the Edwards Aquifer recharge zone can also bring extra TCEQ requirements, and we can help you sort those out before work starts. Learn more about our construction safety services in Texas.

Hazardous Waste Disposal and Environmental Compliance in San Antonio

Berg also handles hazardous waste for South Texas companies, from figuring out your generator status and waste classifications to arranging compliant pickup, transportation, and disposal. Having one partner for safety, environmental compliance, and waste disposal means fewer vendors and fewer gaps between them.

Hazardous waste is one of the areas where well-run companies most often get caught off guard, usually over labeling, storage time limits, or paperwork. If you’re not sure where you stand, start with our guide to Texas hazardous waste generator status, or see our San Antonio environmental consulting services.

Frequently Asked Questions About Safety Consulting in San Antonio

Does Berg Compliance Solutions serve San Antonio?

Yes. Berg Compliance Solutions has served manufacturers and general contractors in San Antonio and South Texas for more than 22 years, with consultants on-site in the area every month and support by phone and email between visits.

What does an OSHA compliance consultant do?

An OSHA compliance consultant identifies which OSHA rules apply to your company, finds the gaps, and builds the written programs, training, and inspections needed to close them. Berg Compliance Solutions also manages those programs over time and helps clients through OSHA inspections and citations.

Can one company handle both safety compliance and hazardous waste disposal?

Yes. Berg Compliance Solutions provides OSHA safety consulting, TCEQ and EPA environmental compliance, and hazardous waste disposal services. Using one partner for all three reduces the number of vendors and the gaps between them.

Do San Antonio general contractors need an OSHA safety program?

Yes. General contractors are expected to maintain written safety programs, train employees, inspect job sites, and manage subcontractor safety as the controlling employer. Berg Compliance Solutions’ BUILD-Safe service helps contractors build and manage that program.

Is a safety consultant different from an EHS or HSE consultant?

Only in scope. A safety consultant covers OSHA workplace safety. An EHS (environmental, health, and safety) or HSE (health, safety, and environment) consultant also handles environmental rules from TCEQ and the EPA, such as hazardous waste, stormwater, and air permits. Berg Compliance Solutions does both, so one partner covers everything.

What should I look for when choosing a safety company in San Antonio?

Choose a safety company that visits your site regularly, knows operations like yours, and covers both OSHA and environmental requirements. Ask whether they manage your program over time or stop after a single audit, and ask for references from long-term clients.

Can Berg help after an OSHA inspection or citation?

Yes. We help companies meet citation deadlines, correct and document each cited hazard, close out citations, and strengthen the programs behind them to prevent repeat violations.

Do Edwards Aquifer rules affect San Antonio companies?

They can. Projects and some facilities located over the Edwards Aquifer recharge or contributing zones in the area may be subject to additional TCEQ requirements. A compliance assessment can determine whether those rules apply to a specific site.

Talk With a San Antonio Safety Consultant

Whether you run a plant on the East Side, a shop in New Braunfels, or a general contracting company working across Bexar County, we’re happy to talk. A short call is usually enough to tell you which OSHA, TCEQ, and hazardous waste rules apply to you, and whether you need ongoing help or just a few fixes. No pitch, no obligation. Request a free consultation or call us at 888-784-1405.

Comparing firms? Our guide on how to choose among safety consulting companies in Texas covers the seven questions to ask before you hire. Berg also serves manufacturers in Houston, Austin, and Dallas-Fort Worth.